WB Epoxy Primer - Application Instructions
With the proper application, Water-borne Epoxy Primer can help protect and prepare your surfaces for topcoat applications. Application is simple and you can even do it yourself.
We have helpful downloadable guides for applying for specific substrates. Below, you can find the application guide for applying Water-borne Epoxy Primer.
Questions about application or post-application care? We’ve got you covered and we’re here to help!
- Painter’s tape
- Power drill
- Epoxy mixer
- Paintbrush (2-4” wide for edges)
- Paint roller extension
- EPOXY roller
Epoxy rollers are designed to leave less stipple than other roller covers. We recommend choosing a lint-free woven roller with a 3/8 inch or 3/16 inch nap for smoother coverage.
- Airless sprayer (optional)
If you are choosing to apply TG-R using an airless sprayer, please note our specifications of the sprayer you should be using below
- Material Flow: 2.9 gal/min (11 liters/min)
- Max Pressure: 270-300 bar
- Air Intake Pressure: 5-6 bar
- Pump Filter: 30 Mesh
- Hose: 2/8”
- Nozzle: 0.027” - 0.031”
PERMA-FLEECE (ROOFING PROJECTS ONLY)
For roofing projects, we recommend using Perma-Flash fleece for penetration points, seams, and joints. The fleece can be dipped into Water-borne Epoxy Primer and shaped around penetration points.
Thermal Guard Roofs, Roof Guard or Floor Guard Extreme are our 3 favored topcoats for Water-borne Epoxy Primer.
Topcoats should be applied 48 hours after application of Water-borne Epoxy Primer after ensuring moisture content is less than 4%.
- Wear protective gloves & gear before applying.
- NEW ROOFING SUBSTRATES from cement and new masonry should have cured for more than 4 weeks prior to application.
- Surface must be cleaned from dirt, debris, and any residue.
- Scrub away mold or mildew, or power wash if necessary. We recommend using a high-performance vacuum to clean the surface.
- Allow surface to dry completely.
- For roofing projects, ensure moisture of the roof is less than 15% prior to application.
Do not apply the product in high humidity conditions (>75%) or if rain is expected within 24 hours after application. For roofing application, ensure roof moisture is less than 15% prior to application.
- Open Part A Base. Using a power drill and epoxy mixer, mix Part A well for a minimum of 1 minute. It is composed of solids, so ensure Base is mixed until fully homogenous.
- Pour all of Part B into the Part A container. Completely mix Part A (Base) & Part B (Hardener) together using mixer for a minimum of 1 minute. Mix at a low RPM in the Part A container.
- Start with penetration points, seams and joints. Take Perma-Flash fleece and dip into mixed Water-borne Epoxy Primer. Shape fleece around joints, seams and penetration points. Allow Water-borne Epoxy Primer & fleece to dry and cure. Use paintbrush to apply Water-borne Epoxy Primer over applied fleece.
- Using a paint brush, paint any edges of your working section. You should work from the exterior to interior of your coverage area.
- If using airless sprayer, spray over application area evenly.
- If using roller, pour material and spread evenly.
- Work in sections until entire area is coated in the same manner, ensuring your spread rate is consistent across the project. Each mixture has a maximum 45-minute working time (at 77°F / 25°C).
- Allow Water-borne Epoxy Primer to dry for 8 hours between coats if applying additional coats.
- Water-borne Epoxy Primer fully dries in 24 hours, and fully cures in 48 hours.
- If working in hotter temperatures, store material in shade or in a cool area to maximize pot life.
- Once 48 hours have passed, ensure moisture content is less than 4% before applying topcoat.