Application - Roof Guard

SURFACE PREP

• Powerwash surfaces and remove any stains.
• Allow surface to dry for at least 24 hours prior to application.

APPLICATION

• Mix base and hardener for 3 minutes before application.
• Apply using a HVLP sprayer with a flat, even nozzle for equal distribution. 
• Can also be applied with brush, roller or airless sprayer.
• No dilution is required. 
• On very absorbent surfaces, re-apply second coating after 15 min
• Touch-dry time is 30 min.
• Maximum performance achieved 30 days after application.
• Test a small area before full-scale application.

ESTIMATED CONSUMPTION

• Up to 250 sq.ft. per gallon, dependent on properties of surface.

 

APPLICATION VIDEO