Application - Repair Guard

SURFACE PREP

• Power wash surfaces and remove any stains.
• Allow surface to dry for at least 24 hours prior to application.

 

APPLICATION

• Shake well before application.
• Apply using a HVLP sprayer with a flat, even nozzle for equal distribution. 
• Can also be applied with brush, roller or airless sprayer.
• No dilution is required. Do not over-apply.
• On very absorbent surfaces, re-apply second coating after 15 min
• Touch-dry time is 30 min.
• Maximum performance achieved 30 days after application.
• Test a small area before full-scale application.

 

ESTIMATED CONSUMPTION

• Up to 250 sq.ft. per gallon, dependent on properties of surface.