Application - ARMUS Cleaner
- Wipe all surfaces clean of dust & debris.
- Wear protective gloves & gear before applying
- Shake well prior to application.
- Rinse the stained surface with ARMUS Cleaner without dilution.
- For lightly stained surfaces, dilute with water up to 1:5 ratio.
- Wait for ARMUS Cleaner to act on the surface for 2-3 min.
- Remove residues by scrubbing with a hard sponge.
- Do NOT use a metal sponge to scrub surface.
- After residue removal, rinse surface thoroughly with water.
- Up to 325 sq.ft. per gallon, dependent on properties of surface.